DescriptionThe DGTP is an easy to read weight indicator capable of performing well in most industrial applications.A panel mount system allows this indicator to be safely and efficiently fitted to most machinery and works exceptionally well for dosage systems and automation.Features Include:-Easy to use 5-key waterproof keyboard.Highly efficient red LED display with 6 20-mm digits and 6 LEDs for showing active functions.Case for panel mounting. Dimensions: 143,5 x 72 x 129mm(lxhxw). Drill template: 135,6 x 66,5 x 120mm(lxhxw).A/D 24-bit sigma-delta conversion, up to 200 conv./sec. autoselect.Management of a digitally equalised 4-cell weighing system or management of 4 independent weighing systems.Connectable with up to 16 analogue load cells with 350 Ohm input resistance.Up to 1.000.000 displayable divisions with internal resolution up to 3.000.000 points.Calibration, Set-Up parameters, configurable from keyboard or from PC.Up to 8 signal linearization pointsFitted real time clock.From 12 Vdc to 24 Vdc power supply.MAIN CERTIFICATIONSEC Type Approval (EN45501)OIML R76OIML R61 – MIDI/O SECTION1 RS232/C or RS485 bidirectional port configurable for connection to PC or external units.1 RS232/C bidirectional port configurable for connection to printer.6 photomosfet outputs: 150 mA 48 Vac / 150 mA 60 Vdc (NO), with configurable functions.4 optoisolator photocouplers inputs: 12÷24 Vdc, 5 mA min – 20 mA max, with configurable functions.TRANSMITTER / INDICATOR: FUNCTIONSTHROUGH KEYBOARD:Zeroing; Semi automatic and presettable tare, print and/or data transmission; ON/Stand-by.SELECTABLE:High Resolution Weighing x 10; Net/Gross or lb/kg conversion; Weighs totalisation; Formulation; Counting; In/Out Truck weighing; Hold e Peak.EXTERNAL INPUT:Simulation of key pressure; Keyboard lock.MOSFET OUTPUT:Set Point Control on the weight, either positive (in loading) or negative (in unloading), or on the pieces (counting mode), with programmable enabling/disabling thresholds, as direct check or upon weight stability.SERIAL PORTS:On all models: Reading of the net, gross, and tare weights; Clearing; Semi automatic and presettable tare; Scale switch; Setting of outputs activation thresholds.DGTP and DGTPAN models: Reading of microvolts or ADC converter for all the channels; Message display; Printing; Setting of APW in counting mode; Simulation of key pressure; MODBUS serial protocol.Analogue output proportional to the net or gross weight, either positive (in loading) or negative (in unloading).